|Agency:||Department of the Air Force|
|Level of Government:||Federal|
|Posted Date:||Jan 10, 2019|
|Due Date:||Jan 24, 2019|
Jan 09, 20195:53 pm
Line Item: 0001AA NSN: FATR TEST REPORT Description: TEST REPORT IAW DD 1423-1
ATTACHED HERETO Quantity: 1.0000 LO Delivery: *180 Calendar Days *ARO Contract Destn: FB2029,HILL
AIR FORCE BASE,UT ,84056-5713. Quantity: 1.00 Unit of Issue:
Line Item:0001AB NSN: FA FIRST ARTICLE - SAME AS BASIC LINE ITEM ABOVE Quantity: 1.0000 EA Delivery: *180 Calendar Days *ARO Contract Destn: FB2029,HILL AIR FORCE BASE,UT ,84056-5713. Quantity: 1.00 Unit of Issue:
Line Item: 0001AC NSN: PROD PRODUCTION ARTICLE - SAME AS BASIC LINE ITEM ABOVE Quantity: 7.0000 EA Delivery: *120 Calendar Days *ARO Approval of First Article Destn: FB2029,HILL AFB UT 84056-5713,49 ,84056-5713. Quantity: 7.00 Unit of Issue:
Electronic procedure will be used for this solicitation. To: D-JENGINEERING, INC., AUGUSTA, KS.,67010-1251. To: METALCRAFT TECHNOLOGIES, INC., CEDAR CITY,UT.,84721-8601. To: NORDAM GROUP, INC., THE, TULSA, OK.,74116-1613.
One or more of the items under this acquisition is subject to Free Trade Agreements. Based upon market research, the Government is not using policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested parties may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.
The technical data required to respond to the solicitation will not be furnished as part of such solicitation and may be found at https://www.fedbizopps.gov/. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. First article test required. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements are cited in each individual solicitation. To include all required reports and data. This part required engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s).
The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application.
Hill AFB, Utah 84056
TRY FOR FREE
Not a USAOPPS Member Yet?
Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.