Procurement Technical Assistance Centers (PTACs) are an official government contracting resource for small businesses. Find your local PTAC (opens in new window) for free government expertise related to contract opportunities.

Sources Sought -- 06Mar2023

**** If interested in this requirement, please email the listed POC with the following information:****

Company Name

Company POC

Email address

Business Size (small, large, Women-owned, etc.)

CAGE Code

Unique Entity ID

CNC Lathe; 16" x 62.5" Max Capacity 1.Swing Diameter-Over Front Apron: 20.5" (520 mm)-Over Cross Slide: 20.5" (520 mm)-Over Tailstock: 20.5" (520 mm)2.Capacities-Chuck: 12.0" (305 mm) Hydraulic Chuck, A2-8-Max Cutting Diameter: BMT Optional Turret -12.0” (304mm)BOT Standard Turret - 15.0” (381mm)-Max Cutting Length: 62.5" (1587 mm) – work holding - Bar Capacity: 4.00" (102 mm)3.Travel-X Axis: 9.4" (239 mm)-Y Axis: 4.0" (102mm)-Z Axis: 62.5" (1588 mm)4.Feedrates-Rapids X & Y: 472 ipm (12.0 m/min) , Z: 945ipm (24.0 m/min)5.Spindle: 40 hp (22.4 kW) direct speed belt drive, 3200 rpm, A2-8 Spindle, 4.62" (117.3 mm)bore5a. Chuck - 12"-A2-8 Hydraulic Chuck6.12-station BOT turret (Bolt-On-Tool), accepts1.00" (25 mm) turning sticks.7.55 Gallon (208 L) Coolant Tank with 3/4 hp(0.6 kW) pump8.1-Year Standard Warranty9.Auto Door-Lathe10.Programmable Tailstock Controller Features:-15" color LCD monitor, 1GB memory, memory lock key switch, USB port, Ethernet connection, M-Code;M-130, spindle orientation and rigid tapping. Includes Driven Tool holder Kit: - 1 each BMT65 90 Degree Driven Tool holder - 1 each BMT65 Straight Driven Tool holder Includes Standard Tool holder Kit: - 1 each 1.0" Face Groove Holder - 2 each 1.0" ID - 3 each 1.5" ID - 1 each coolant block - 9 each turret face wedge/clamp - Assorted coolant fittings.

Options: 4000 RPM Live Tooling with C Axis: Includes 24-station (half-index) BMT65 turret. Accepts industry-standard base-mount tooling. Use live tooling to perform secondary operations (milling, drilling, flatting, and tapping) on the face and around the diameter of parts. The fully synchronized C axis provides precise interpolated bidirectional motion for positioning and repeatability. The 24-station BMT65 turret offers half-station indexing that increases your available tool stations. The turret will index every 15 degrees Internal High-Voltage Isolated Transformer for 380-480V operation. High-Pressure Coolant system provides up to 1000 psi (69 bar) of coolant to the cutting tool, allowing for heavier cuts, higher feed rates, deep-hole drilling, and better surface finishes. The 1000 psi (69 bar) system with coolant passages of 0.050 in (1.3 mm) and smaller belt-type chip conveyor The conveyor automatically removes chips from the machine, and discharges them at 55-gallon barrel height.

Machine Tooling: Driven Tool holder, 90 Degree, for BMT65 Turret, Driven Tool holder, Straight, for BMT65 Turret.

SHIPPING: The contractor is responsible for delivery of the equipment to the Tooele Army Depot. Adequate preserving of equipment surfaces, packing, marking, and skidding of materials for shipment shall be the responsibility of the contractor. If special lifting devices, such as hooks or eyes, are required for ease of handling, they shall be supplied with the equipment. Any special devices shall be returned to the contractor upon request only if they will not be required for future movement of the equipment, and at the contractor’s expense.

Installation: The contractor shall be solely responsible for any necessary site inspections required for determining the specifications of work that must be completed prior to final system installation. The contractor will then provide detailed information of any preparation work that the vendor must perform prior to system installation to Tooele Army Depot.

This is a SOURCES SOUGHT NOTICE only and shall not be construed as a solicitation or as an obligation on the part of the Government. This notice does not obligate the Government to award a contract or otherwise pay for the information provided in the response. The Government will not accept requests for meetings or briefings. No phone solicitations or email with regards to the status of the Request for Proposal (RFP) will be accepted prior to the solicitation release.